/Sena 20S How To Video (Voice Commands)

Sena 20S How To Video (Voice Commands)

Video: Sena 20S How To Video (Voice Commands)

Subtitles

The senate 20S features a voice command system which you can use to access a variety of functions such as intercom, speed dial, music or FM radio The 20S has two methods to activate voice command system The first method is to say the voice command Hello Sena! Cancel This voice command can only be used when the 20S is in standby mode. The second method is to double tap the body of the main unit but be mindful not to tap the Jog Dial as that will activate the intercom function. Cancel Here is a list of all of the voice commands for the 20S and their functions. These are the voice commands for Multi-way Intercom and Group Intercom. Intercom Pairing The voice command "pairing intercom" will put the 20S into intercom pairing mode and the LED will begin flashing red rapidly so that it can be paired to another headset for intercom communications.

This command needs to be used when in Standby mode. Pairing Intercom Intercom Call By saying the voice command "Intercom one", "Intercom two", "intercom three" up to "intercom nine" into the microphone this will cost the 20S to open intercom channel with that specific paired headset. If you say the same voice command into the command system into the voice command system then it will cause the 20S to disconnect from that specific headset. This command needs to be used when in Standby mode. Intercom One End Intercom The voice command "end intercom" will close the connection between any intercom connected headsets. If you are in a group intercom then the person that created the group using the 20S Smartphone App will terminate the group intercom connection between all connected headsets when giving the "end intercom" voice command.

READ  Zuckerberg Unveils Facebook Home for Android

If a member of the group intercom says the "end intercom" then that person will terminate very individual connection from the group Note this will cause the group to split up as they are no longer holding the entire group together. This command needs to be used when in intercom mode and in group intercom mode. End Intercom Call Last Intercom The voice command "last intercom" will cause the 20S to reconnect and open the intercom channel to the last headset that it was connected to for intercom communication. This command needs to be used when in Standby mode. Last Intercom End Intercom Group Intercom The voice command "group intercom" will cause the 20S to connect all of the headsets that have been saved to the 20S when creating the group in the 20S Smartphone App. This command needs to be used when in Standby mode. Group Intercom End Intercom These are the voice commands for Speed Dial and redialing the last phone number.

Speed dialing If a Bluetooth enabled phone is connected to the 20S then the voice command "speed dial one", "speed dial two" or "speed dial three" will cause the 20S to call the phone numbers that have been saved for each of those presets that have set up using the Speed Dial feature. This command needs to be used when in Standby mode. Speed dial one Redialing the last phone number If a Bluetooth enabled phone is connected to the 20S then the voice command "redial" will call the last phone number that was entered into the mobile phone. This command needs to be used when in Standby mode. Redial These are the voice commands for Music mode and the FM Radio. Starting music To listen to music through the 20S, the voice command "music" or "stereo" will cause the music to start playing through the headset.

READ  Save Instagram Images and Videos on your Android | No root

If either of "music" or "stereo" voice command is given again while the music is playing then it will cause the music to stop playing. This command needs to be used when in Standby mode or in Music mode. Music Music Stereo Stereo Turning on FM radio The voice command "FM radio" will cause the 20S to turn on the FM radio. While the FM radio is on, giving the voice command "FM radio" again will cause the FM radio to turn off. This command needs to be used when in Standby mode or in FM radio mode. FM radio FM radio Next track or next radio station preset The voice command "next" will cause the 20S to skip forward to the next track in your playlist when you are listening to music in the Music mode and this command will cause the 20S to go to the next saved preset when you're listening to the FM radio. This command needs to be used when in Music mode or in FM radio mode. Music Next Music Previous track or previous radio station preset The voice command "previous" will cause the 20S to skip backwards to the previous track in your playlist when you are listening to music in the Music mode and this command will cause the 20S to go to the previous saved preset when you are listening to the FM radio.

This command needs to be used when in Music mode or in FM radio mode. Music Music Previous Music Stopping music or stopping the FM radio The voice command "stop" will cause the 20S to stop playing music while in Music mode and will turn off the FM radio when listening to the FM radio. This command needs to be used when in Music mode or in FM radio mode. Music Stop These are the list of commands that can be given while in Standby mode. Check battery The voice command "check battery" will cause the 20S to say the current battery level of the headset through the voice prompt. Check battery Check connected devices The voice command "connected devices" will cause the 20S to list all devices that are currently connected such as "phone", "media", or "intercom". Connected devices Configuration menu The voice command "configuration" will cause the 20S to access the Configuration Menu where you can rotate the Jog Dial to cycle between settings such as Speed Dial, Universal Intercom, or Audio Multitasking.

READ  The Value of App Ideas - A Minute of Overpass : Makers of Mobile Language Learning Games

Configuration Voice command help The voice command "what can I say?" will cause the 20S to list all of the voice commands that are listed on for the 20S. What can I say? Canceling operations The voice command "cancel" will cause the 20S to cancel the voice command mode and return the headset to its previous mode. Cancel That is the voice command system that is featured on the Sena 20S by Sena Technologies..