/How to Install and Pair LED Bluetooth Downlight Speakers | 1000Bulbs.com

How to Install and Pair LED Bluetooth Downlight Speakers | 1000Bulbs.com

Video: How to Install and Pair LED Bluetooth Downlight Speakers | 1000Bulbs.com

Subtitles

Congratulations on your new 6SL wireless speaker downlight from Lithonia Lighting. We hope you're excited to begin enjoying this easy and efficient way to enhance your space using lighting and music. We're going to take you through the basic steps for pairing and installing the 6SL. Before we get started, please note that a complete list of installation instructions and other information can be found in the instruction manual along with your unit. We recommend reviewing this material for a detailed understanding of the 6SL and its components.

Okay, let's get started. Our first step is activating the battery. To begin, remove the protective tab from the battery cover on the back of the speaker. Confirm the orange connector of the power plug is connected to the fixture's mating orange connector and plug it in to a standard 120 Volt outlet. The unit will turn on automatically and you will hear and audible four tone low to high chime. [four tone low-high chime] The pair button will start blinking green. This indicates the speaker battery has been activated. Let's hold the on/off button until you hear an audible four tone high to low chime to turn off the speaker. [four tone high-low chime] Remove the power plug from the electrical outlet and disconnect the plug from the fixture. The next step is pairing the master unit. We want to complete this step before we install the unit to ensure a successful audio connection.

READ  Battery Test: LGG5 vs Galaxy S7 vs iPhone SE vs Nexus 6P vs Note 5

First, we want to confirm that this unit is in master mode by ensuring the S/M switch is toggled toward M here on the back of the speaker. Let's hold the on/off button for two seconds until we hear a chime like this. [three tone low-high chime] The pair button will blink green and the S/M indicator light will blink blue here under the speaker grill. We now know that we're in master mode and ready to pair. Place your bluetooth enabled device in search mode and select Down Light Speaker from the menu. Successful pairing is indicated with a beep sound like this. [beep] Now go ahead and play some music from your device to ensure connection. The 6SL is able to pair up to 8 units for a stereo quality sound experience. Lets pair another unit to the master we just activated.

The setup begins the same way as before. Instead of toggling the S/M switch to M, I'm going to make sure it's on S for satellite. I'm going to turn the unit on the same way and listen for my chime. [chime] Now, my pair button is illuminated green and giving a beep sound. [beep] The S/M indicator light is now also illuminated green indicating that the unit is paired in satellite mode. Now with the master unit playing music, press the pair button on the satellite unit until it makes a beep sound and starts quickly flashing green. Then, separately press and hold the pair button on the master unit. The satellite unit will make a beep sound confirming it's paired with the master unit. The music should now come from both units. This may take up to 20 seconds. The pair button on both units will illuminate to a solid green and will remain like this as long as the units are paired. Pretty easy and you can repeat this process for up to seven more satellite units.

READ  Legends Never Die (ft. Against The Current) | Worlds 2017 - League of Legends

Now that we have paired our unit, let's prepare for installation. First we want to double check that our input power is 120 Volts, 60 hertz and our supply wires are rated for at least 194 degrees Fahrenheit. We're also going to make sure that the power is disconnected by turning off the circuit breaker or removing the appropriate fuse. Now, we're going to select the wiring method. If you're using the LED connector, just plug the orange connector from the fixture into the mating LED connector inside the housing here. If you'd like to use the E26 socket adapter, just screw the adapter into the base socket inside the housing. Now we're ready to install the unit. Squeeze the legs of each torsion spring together and seat them inside the torsion brackets of the housing. Release the springs and gently push the module into the housing until its flush with the ceiling.

You can repeat these steps for each additional unit. Just make sure all satellite units are within 60 feet of the master unit. To start enjoying music, wake the master unit from sleep mode by flipping the light switch or dimmer. Once we hear the audible chime and see the S/M indicator light blinking blue, we can reconnect the device to the master unit. Once connected, you're ready to start enjoying the 6SL. Charging the battery is as simple as turning the light fixture on. The charging indicator light will illuminate red, indicating it's receiving power and charging. A full charge takes about 4 hours and once charged, the unit is good for 6 hours of music with the lights off. Well, that's it, and remember, a full list of instructions, tips and other information can be found in your manual. We hope you enjoy your 6SL wireless speaker downlight from Lithonia Lighting.

READ  Mental Game | How To Win More Tournaments

Thanks for watching..